The key to the operation of the polishing machine is to try to get the maximum polishing rate in order to remove the damaged layer caused by polishing as soon as possible. At the same time, it is also necessary to make the polishing damage layer not affect the finally observed tissue, that is, not cause false tissue. Let me explain to you what to pay attention to when using a high-speed polishing machine?
In these three cases, the high-speed polishing machine must not be used. The first is that the operator has not received professional training. The second is that the operator has not learned the "safe operation procedures." Third, the high-speed polishing machine is not operating normally.
Before using a high-speed polisher, check the environment as follows
Keep the hands and feet of the operator away from the rotating polishing head and do not step on the power cord or entangle the power cord into the polishing head. The polished area must not exceed the length of the power cord. Take off the operating handle without authorization. When stopping, the handle must be released after the high-speed polishing machine has completely stopped rotating. Do not use a polishing pad with dust or dirt on it. Replace the polishing pad when it is too dirty to clean. When replacing or installing the polishing pad, the power must be turned off.
The storage of the high-speed polishing machine must cut off the power, tilt it backwards, and store the rear wheels on the ground. It should not be stored outdoors and should be stored in a dry place.